Quite often, car owners are faced with the need to clean the injector. This is especially noticeable during periods of melting snow and in summer. When environmental conditions cause the machine's systems to operate at high loads, the injector clogs faster.
To make the cleaning process quick and efficient, motorists use special tools. One of the most popular methods in this area is flushing the injector with Vins. It can be performed at the service station, but if desired, all actions can be carried out independently. To do this, use the instructions for use of the product. The advice of professional car mechanics and ordinary users will also help to understand the principle of flushing.
Why do I need cleaning
Gasoline, which today is used as fuel for automobiles, contains various additives and impurities in various ratios. They improve engine performance, increase octane rating.
Over time, all these impurities settle on the engine parts. This is especially acute in the capacity of the fuel lines. The injector also suffers. Deposits accumulate both outside and inside it.
Often, to remove the film from the settled particles of fuel impurities, a tool such as Vince is used. Flushing the injector gives good results. The capacity of the fuel channels increases to 25%. The engine works at the same time fully and efficiently. Flushing extends its service life if all actions are carried out correctly.
Signs of clogging
In some cases, a car driver can independently determine that a Vins flushing of the injector is necessary. To do this, pay attention to the operation of the engine system. First of all, a decrease in its power is felt. This increases fuel consumption. Starting a car is getting harder. This is especially noticeable in the winter.
Among other things, the engine becomes unstable. This can be seen at idle or during regime changes. To fully accelerate, you have to spend more time. This increases the toxic characteristics of exhaust gases. “Dips” can also be felt when the engine is in a pre-warmed state. Knocking may even occur. If the listed operating features are determined when driving a car, it may be necessary to flush the injector.
Vins flushing reviews
For many years, flushing the Vins injector has been very popular among motorists. The reviews of experts and ordinary users allow us to conclude that the tool is highly effective. It has an optimal ratio of price and quality. There are many global brands on the washing chemicals market. The competitor of the Belgian product for Vins injectors is Japanese similar products. She has the same qualities, but her cost is much higher.
Experts say that the Belgian product contains a large number of solvents of various levels. Their balanced composition allows washing to quickly begin to dissolve layers of almost any thickness.
Product properties
What does flushing the injector give? Wynns is a product that has a defined set of characteristics. They must be considered before cleaning the engine systems. Details in the process of work do not need to be dismantled. "Vince" successfully fights traces of soot injector, as well as pistons, valves, piston rings. The combustion chamber is also cleaned fairly well.
After the procedure, the operating characteristics of the nozzle spray torches are restored. At the same time, the gasoline intake period is optimized. This can be done by flushing the exhaust valves. In the future, their sticking is prevented. Knocking is eliminated and the quality of starting the engine is improved. All these properties contribute to lower fuel consumption. Therefore, the presented tool holds a leading position in the automotive chemistry market for many years. This is a worldwide brand name product.
Instructions for the work
In order to carry out all the actions yourself, you must be familiar with the Vins application technique. Injector flushing, the instruction of which is quite simple, is carried out in stages.
First you need to get to the treatment area where the engine has problems. Dismantling the motor is also carried out in a certain sequence. First you need to turn it on and remove the fuse. He is responsible for the operation of the pump. In this case, the pressure in the system drops.
After that, the terminals are disconnected from the nozzles. Also, the discharge, reversible hoses responsible for the supply of fuel are disconnected. The nozzle plate and o-rings are very carefully dismantled. After these steps, you can easily get to the injector. Next, flushing is performed directly.
The main stage of work
Flushing the Vince injector, the instructions for use of which has been used by motorists for a long time, is quite simple. To begin work, it is necessary to prepare a device that allows you to conveniently drive the tool through the nozzles. A plastic bottle is quite suitable for this. It is connected with the capacity of the carburetor discharge fluid and the nozzle inlet.
Next, you will need to apply 2 wires from the battery. They are connected to the nozzle terminals. Then flushing takes place directly. Under pressure, the product is passed through the nozzle. During this action, it is necessary to open and close the valve alternately.
The procedure is performed until the required spray of gasoline is obtained. If this does not happen, you will have to replace the nozzle. So this part is out of order. After the first wash, the procedure is performed again.
Shutdown
After the Vins injector flush fluid has passed through the system 2 times, the layers of contamination should completely disappear. If this does not happen, the product should be left inside the nozzles for a while. This will completely get rid of deposits harmful to the engine and completely clean the injector.
Work is stopped when the valve seat of the valve, as well as 6 cleaned holes at the nozzle, become visible. Assemble in the reverse order. To do this, when disassembling, it is necessary to remember all the stages of work. If any action cannot be remembered, you must use the instructions for disassembling the motor of the car. So to perform all the manipulations in the reverse order will be much easier.
Engine starting
After the Vins flushing of the injector is completed, it is necessary to start the engine for the first time. To do this, wait 30 minutes after completion of the assembly of all parts. If all actions were performed correctly, the engine will start the first time. His work will be significantly different. The engine will function much quieter. This reduces the amount of exhaust gas.
Flushing at this stage is considered complete. The owner of the car in carrying out all the actions on his own significantly saves his money and time. The engine will function stably. It will not even be affected by its operating modes and gearshift frequency. As a result, fuel consumption is significantly reduced. Therefore, periodic washing of the injector is simply necessary. Having certain skills in servicing car systems, as well as desire and free time, all the actions will be quite simple to carry out independently.
Should I contact a car service?
Using means for washing the injector "Vince", it is possible to achieve good results. But many motorists have a question about the advisability of carrying out all actions on their own. In some cases, truly visiting the service station cannot be avoided. But more often than not, good results can be achieved when performing car maintenance on their own.
If the owner of the machine has the ability to flush the injector yourself, it will be better to use special diagnostic tools. Autoscanner allows you to control the system of the machine and through a smartphone to convey information to the user. This is very convenient and saves a huge amount of family budget.
However, in the presence of severe contamination or in very advanced cases, flushing is carried out only by specialists. In this case, special equipment or other cleaning principles may be required.
Injector treatment at service stations
Flushing with a Vins injector is not always advisable at home. Sometimes you just can’t do without the help of specialists. It will cost much more, but it so happens that only a full diagnosis and comprehensive service will return the functioning of the car systems. The service station also provides a guarantee for the work performed. It is also important for car owners.
Sometimes, not only the injector, but the entire fuel supply system requires a thorough flush. If the solenoid valves are strongly slagged, consult a specialist. Perhaps cleaning these parts will be done using ultrasound. A special system allows you to check the operation of nozzles outside the car.
The measuring equipment owned by the service station makes it possible to estimate the spraying intensity. Therefore, if the injector has not been flushed for a very long time, and the carbon layer is very large, it is better to use special equipment. Let this procedure be more expensive, but only it can restore the legal capacity of the car.