👌🏽 ✋ 🧜 How to make a double bed do-it-yourself ♐️ 🚻 🤷🏼

You can make a double bed with your own hands almost without any problems. The availability of ready-made drawings on the network, as well as a large variety of manuals will help in this matter. The most common material for assembling such furniture is wood. If this is the first copy that the owner decided to make himself, then it is worth using it, since it is cheap and also easy to process.

What will be required for work?

The work begins with the fact that you need to prepare everything you need:

drawings and diagrams for a double bed with their own hands, on which all sizes for each part are indicated;
sheet plywood and metal corners;
large capacity with PVA and MDF glue;
self-tapping screws or nails for furniture assembly;
pinched and timber.

After this, you can begin to prepare blanks for further assembly of the bed:

14 pcs needed bars with dimensions of 4 x 5 cm. The main requirements are the absence of defects, strength. In addition, they should be perfectly even, and therefore usually preference is given to glued pine as a material for such blocks. Their length should be 200-210 cm.
You will need planed and trim rails in the amount of 20 pieces with a length of 2 m and a size of 2 x 10 cm.
Some make boxes that are built inside a double bed with their own hands. If they are necessary, then for them you need to purchase additional sheets of chipboard.
It is worth buying fasteners with a margin. Most often, assembly does not require expensive parts. Enough about 70 wood screws with a length of about 6 cm.

A little nuance. Before proceeding with the assembly of the frame, it is best to purchase a mattress. It often happens that it differs from the declared sizes by several cm, and therefore, you may have to adjust the dimensions of the furniture.

Beginning of work

How to make a double bed with your own hands? The work is carried out in the following sequence.

The first step is, of course, the assembly of the frame. In order for the structure to turn out to be as rigid and strong as possible, each side of it should be assembled from three parallel bars that are fastened together. The result should be a rectangle with even sides. The internal dimensions of this frame must be exactly equal to the size of the mattress. If there is a risk of making a mistake with the dimensions, then it is worth making an allowance on each side of the wooden base by 1-2 cm.

To successfully assemble a double bed with your own hands, you need to follow these steps of assembling the frame:

It is necessary to take bars with dimensions of 4 x 5 cm and cut them into two parts of 162 cm. We must not forget about the allowances of 1 cm on each side. Next, you need two parts of 210 cm. This can be achieved if you use elements with a length of 202 cm and add two bars of 4 cm each. When all the parts are ready, they need to be laid on the floor and PVA furniture glue can be applied immediately to the first row.
The next step is laying the second row of the timber on top of the first, right away. It is very important to ensure that there are no distortions. The material should lie exactly on top of the first. Immediately you need to fix the wood with self-tapping screws. The best way to check if a rectangle is smooth is to measure the distance with a tape measure diagonally on both sides.

Fixing and legs for the frame

Drawings of a double bed with your own hands should include some additional elements:

The first is regarding fixation. During the twisting of the screws, excess glue will come out. They must be removed immediately, otherwise they will not only spoil the appearance of the bed, but also dry up, preventing the wood surface from being treated properly.
How to make a bed more comfortable with your own hands? It is necessary to make an orthopedic base for furniture. However, the slats used for this have a thickness of only 2 cm, which is too small to support the weight of the mattress and two people. For this reason, just in the center of the frame, you need to add another stiffener with two legs.
Naturally, it is necessary to add 4 more legs to the base. They are installed at the corners of the rectangle. The legs will be segments from the bars, the measurements of which are 4 x 5 cm. After they are securely fixed in the corners with glue and screws, you can turn the furniture over to the legs.
Do-it-yourself drawings of a double bed made of wood should include the presence of supports for the rack base. To do this, use the same material that was used to assemble the base. The length of these supports is equal to the inner width of the bed.
A small nuance is that the thickness of the frame is enough to fix the three tiers of such rails. However, only one needs to be fixed, and it should be at the level of the second row. In this case, there will also be a place for installing thin orthopedic rails, if necessary.

Fastening rails and completion of work with the frame

Making a double bed with your own hands on technology involves several more final steps:

The rails are fastened in increments of 15 to 30 mm. It is only necessary to remember that the chosen step must be observed until the very end of the bed. Each rail is fixed with two screws in three places: on the sides, as well as on the axial stiffener. Glue is also used.
After installing all the elements, it is necessary to leave the glue to dry.
From this moment you can proceed to the final stage. It begins with the fact that all elements, including legs, are ground. You can use a special grinder or grinder with a special coarse-grained machine. After this work, you need to once again process all sides, but with fine-grained sandpaper by hand. Movement should be along the wood fibers.
After this, you need to make sure that the entire surface is perfectly smooth and remove all dust from it. If this is not done, then it will settle on the paint and spoil the appearance of the furniture.
As a paint, it is best to use a varnish that is characterized by abrasion resistance.
Do-it-yourself double bed made of wood is covered in this order. First, the frame is treated with a primer for wood, after which you can begin to apply layers of paintwork. It is important to know that you need to apply a minimum of 3 layers.

Rectangular headboard for bed

How to make a bed with your own hands? Making a frame and processing it is not all. It is also necessary to independently assemble the headboard for the structure. There are several options for this add-on. The simplest option is a rectangular soft headboard. To assemble it, you will need a piece of plywood, fabric, foam rubber, synthetic winterizer, a building type stapler and staples for it:

You need to take a sheet of plywood and cut to the desired size. The thickness of this material is determined purely individually.
On top of this sheet you need to lay an ironed piece of fabric. All dimensions must be such as to confidently cover the entire sheet, foam, and also go to the back wall of plywood at least 15 cm.
First, one side is fixed. After that, you need to fix all the rest. It is important to ensure that the desired tension is created. After all 4 sides are attached, you need to turn the head over to check that the tension remains as it should, and also make sure there are no wrinkles.
It usually takes several hours to assemble such an element. You can mount it to the wall. To do this, metal ears-loops are used, which are attached to the headboard on the back side, and screws are screwed into the wall. However, this method will not work if the wall, for example, is made of drywall without a mortgage.

Another headboard option

How to make a bed with your own hands? Step-by-step recommendations include making several headboard options. To assemble the figured part, the following tools and materials will be required:

plywood;
a piece of soap or chalk to make markings on the fabric;
universal glue with which it is possible to glue both foam rubber and fabric;
construction type stapler;
foam rubber;
furniture nails;
decorative material for the upholstery of the element.

The work begins with the fact that it is necessary to prepare a curly sketch of the part. After that, you need to prepare a stencil of the part in full size. the presence of such a blank of paper will also help determine whether such an option is suitable for the bed. According to the stencil, it is necessary to cut such a part out of foam rubber and plywood. Further, in order to complete the double bed with your own hands and its head, you need to coat all the edges of plywood and foam with glue, and connect them together. To improve fixation, foam can be nailed to the edges with a stapler.

Diagram of a double bed with lower drawers

A decorative fabric is laid on top of this material and is also nailed with a stapler along the edge. After this, you need to turn the head over and fix all the allowances so that they are tight. In order to hide all the staples that the stapler will leave, decorative twine is used, which is fastened with furniture nails along the edge of the part. After that, we can assume that the headboard is ready.

Carriage coupler

There is another option for assembling the headboard, which is called a carriage screed. Most often it is used together with elite models of furniture. For a double bed with your own hands, this will be the best decoration. As working materials, everything is used the same as in the previous versions. In addition, you only need to purchase a decorative lace and the right amount of decorative large buttons.

Foam is glued onto a plywood sheet of the desired shape. To achieve the desired result, the thickness of this material should be at least 5 cm. Next, you need to take a sheet of paper that matches the dimensions of the head itself and draw it into squares. Marks are made in the right places - these are the places for installing the buttons. These points are cut out and the sheet is applied to the part from the side where the foam is located. Using a pencil marks are made for fastening buttons. In all such places, it is necessary to make holes in the foam rubber and in the plywood. Their diameter should be slightly smaller than the buttons themselves. To do this, you can use an electric drill with the right nozzle. Decorative fabric is also beaten with a stapler. Buttons have ears through which you must pass a thick rope. A thin incision is made into the fabric in the place where the button should be located. The rope is stretched through so that the button strongly presses both the fabric and the foam, and snuggles firmly against the plywood. On the reverse side, the rope is tied and fixed with a stapler.

Double bed

This type of furniture is best suited if the room itself is small enough. The main advantages include the following:

Under the double bed there will be a lot of space that you can use at your discretion.
Since under the bed it will be possible to store things, bedding, etc., the need to purchase a wardrobe will disappear.
The lifting mechanism is considered quite simple in terms of operation.
If the entire interior is designed in a minimalist style, then a lifting bed will be the best solution.
In the lowered form, the space under the bed will be fully occupied, which means that dust will not accumulate there, and also, for example, children's toys and so on will not get there.

Mechanism options

Assembling a wooden bed with your own hands with a lifting mechanism is not much different from a regular bed. The only difference is that you need to buy the necessary set for lifting on hinges.

The main structural elements will be:

frame;
lifting gear;
fittings;
mattress.

In total, there are three options for lifting mechanisms that are successfully used in DIY assembly.

The first type is a gas shock absorber. This device is considered the most expensive, but at the same time it is the most reliable and easiest to use. To raise the object will have to put a minimum of effort, and therefore it is the gas version that is considered optimal to lift a heavy double bed.

The second type of device is a spring mechanism. This device is made more simply, and therefore its cost is somewhat lower. In the initial state, the reliability and strength of this mechanism is also quite high, but with prolonged use, the springs wear out and can fail over time. However, their replacement is quite simple, and by themselves they cost quite a bit. A significant drawback is that the lifting process itself is difficult. Therefore, it is not often chosen for a double or children's bed.

The last, third type is loops. Naturally, this device is the most primitive and cheapest. However, this version of the device does not even take upon itself a partial load when lifting. The whole weight of the bed will fall on the one who raises it, and therefore for a double design, which is quite heavy, it is usually not chosen at all.

Drawings and reviews of a double bed do-it-yourself

As for the drawings for a double bed, here it is worth saying that a lot depends on this stage, and therefore it is not worth compiling them yourself, if there is absolutely no experience in this. You can use those that are presented in the article, or you can contact a special company that will help overcome this stage.

As for the reviews on the assembly of this furniture with your own hands, we can say with confidence that there are no negative ones. Reviews have a positive connotation. The thing is that with self-assembly, not only material costs are reduced, but also the possibility of individual design for the bed appears, which often plays a decisive role.

It is worth paying a little attention to where it is recommended to install this type of furniture. It is not recommended to install the bed headboard to the window, as in this case it can blow. If you place the headboard in the direction of the doorway, you will not be able to see who is entering the room. It is best to arrange the furniture in such a way that a chandelier, a picture and other objects do not hang over it. There are houses whose outer walls are insulated. In such places to have a place to rest is also not worth it. If the bedroom is small in width, then you do not need to center the furniture, it will be very inconvenient and can cause severe discomfort.

We examined in detail information on how to make a double bed with our own hands. As you can see, this is not at all difficult, but very economical. In addition, by creating furniture yourself, you can realize your creative potential and give free rein to your imagination. Therefore, do not be afraid to experiment.

How to make a double bed do-it-yourself