To store food in modern homes, it is customary to keep refrigerators. At the same time, the devices differ in operating principles. Devices of all brands have their own characteristics, which it is advisable to learn about before buying. The instruction for the Minsk double-chamber refrigerator will allow using the equipment in accordance with the rules recommended by the manufacturer.
Purpose and device
Before operating the equipment, it is necessary to familiarize yourself with the instructions for the Minsk double-chamber refrigerator. The device is designed to store food. This is a floor-standing rectilinear cabinet with an internal refrigerator and a lockable door. At the top of the device there is a source of cold - an evaporator.
Cooling occurs due to the cold, which appears with the evaporation of the refrigerant (Freon-12). Products must be placed on the shelves of the camera and inside the door panel. There are also convenient shelves in the freezer section. Under the evaporator is a tray collecting melt water. A tank is installed in the guides of the pallet, which is designed to store meat and fish.
The refrigerator is equipped with removable shelves, ice molds, a container for fruits and vegetables. On the door panel there are compartments for eggs, cheese, milk, drinks, canned goods. There is also a special vessel for oil. To maintain the set temperature, a temperature controller and an electric lamp are installed on the side wall of the camera to illuminate the inside of the device. You can start the electric motor and protect its windings from overloads using the combined start-up relay.
Installation and inclusion
These nuances are indicated in the instructions for the Minsk double-chamber refrigerator. It is advisable to install the device in a cool place, away from heat sources. The space between the wall and the device is maintained by the stops that are on the back of the product. Do not overlap it, since a lack of air circulation leads to a deterioration in the cooling of the condenser and the functioning of the unit.
Adjustable feet should be installed before placement. To do this, you must:
- Tilt the device.
- Take 4 supports and screw them into the threaded holes on the bottom of the device.
When the legs are adjusted, the plastic nuts must be tightened. Before using the appliance, it must be washed and wiped. The instructions for the Minsk double-chamber refrigerator say that it is important to check the compliance of the voltage indicated behind the device with the mains voltage. If the indicators do not correspond, then switching on is possible only with an autotransformer, which has a power of 300 watts. Turn the refrigerator on and off using the thermostat knob.
Nuances
If the room temperature drops (+ 18 ° C), and the device is not loaded much, the temperature control knob must be set counterclockwise to the edge of the left position. And when the temperature rises, the knob is turned clockwise to the extreme position so that the circulation is cyclic.
Ice must be prepared in the evaporator baths. Forms are filled with water up to 4-5 mm below the edge. If you want to quickly prepare ice, the thermostat is installed clockwise closer to the extreme position. Frozen pieces can easily be separated if the forms are left for 2-3 minutes in the room, and then a little finger click on the bottom.
Care
The operating instructions for the Minsk double-chamber refrigerator also contain the care rules. During the operation of the equipment, snow is collected on the evaporator, which slows down the heat removal from the chamber. So there is a deterioration in the temperature in the cabinet and the refrigerator will function less economically. With the advent of snow, the evaporator needs to thaw. To do this, you need:
- Remove food from evaporator and refrigerator.
- Turn on the device by putting the thermostat in the extreme position. You just need to turn the knob counterclockwise.
- When the snow has thawed, you need to remove the pan, remove the water and wipe it.
You cannot remove snow with sharp objects, as there is a risk of puncture in the evaporator channels. You need to wash it only with clean water. Acid and alkali solutions must not enter the evaporator. The outside of the cabinet is also washed with plain water, and dust is removed with a soft material. Inside, it is allowed to carry out processing with a soapy solution.
The instructions for the old Minsk Atlant two-chamber refrigerator include similar operating rules for the device. It is important to adhere to the manufacturer's recommendations, then the equipment will last a long time.