LED phase indicator: diagram and model overview. How to make a DIY phase indicator

When installing an outlet or switch in an apartment, you must have a phase indicator on hand. These devices differ among themselves in the power of the generator. Also, models have their own frequency and threshold resistance. There are quite a few phase indicators on the market.

They are made with two, three clamps. The impulse rate of the models does not exceed 90%. When choosing a modification, it is important to pay attention to the protection class. In order to learn more about phase indicators, it is necessary to consider the circuit of the device.

phase indicator circuit

Phase Indicator: Circuit

The phase indicator circuit includes a wired generator. To determine the voltage there is a damper. Sensors in devices are installed with different reducibility. For some elements, the LED is used with an amplifier. If we consider modifications with a display, then they have a microcontroller installed. To protect the device from overload, capacitors of operational or pulse type are used.

LED phase indicator

Homemade modification

If necessary, the LED phase indicator can be done independently. First of all, a high-quality wired generator is selected for this. The output voltage indicator for it should be at least 12 V. Also, a damper will be required to assemble the device. Various types are available on the market, and they are quite different in sensitivity. If we consider a simple model, then it is more expedient to select an element with a resistor. The microcontroller for the phase indicator will require a multi-channel type. At the end of the work, the LED is fixed, as well as the clips.

Consumer Reviews for Extech DV25

The indicated phase indicators are manufactured with three clamps. In this case, the measurement accuracy is very high. The generator in the device uses a wired type. The maximum overload parameter is 3.3 A. There is only one sensor in the model. According to experts, he is not afraid of high humidity. To protect the device from power surges, capacitors are installed.

For domestic use, the model fits perfectly. However, it is important to note that conductors are used for short lengths. To determine the phase in the power shield, the model does not fit unambiguously. According to experts, the battery is used with low power, and it lasts only three hours. You can buy the presented phase indicator on the market at a price of 6500 rubles.

Extech DV30 Review

The indicated phase indicator (light) is very easy to use. In total, he has three clamps. In this case, the generator is set to 3 A. According to experts, the capacitors are used in high quality. In total, the model has two sensors. Thus, the phase detection rate is very high. Permissible humidity level is only 33%.

The capacitor in the device is installed capacitive type. The working frequency of the phase sensor is 500 Hz. In turn, the threshold resistance is 20 ohms. The model is not suitable for working with power shields. However, when carrying out repairs in the apartment can greatly help. It is also important to note that the model has a calibration function. You can buy this phase indicator on the market for 6 thousand rubles.

LED phase indicator

Description of Extech DV45 models

This phase indicator has recently been in great demand. First of all, experts note its compactness. In this case, the holder is used with a rubber lining. In total, the model has two clamps. The generator in the device is used at 4 A. The operating frequency of the phase indicator is 550 Hz. According to experts, the model is capable of withstanding large current loads.

For professionals, it fits perfectly. Capacitors in the device are pulse type. It is also important to mention a quality battery. The minimum permissible temperature of the presented phase indicator is -20 degrees. The specified device is not afraid of humidity. You can buy a model in the store for 7200 rubles.

Consumer reviews on the model LUXEON EWR-5000

The indicated phase indicator receives good reviews from customers. The appliance is ideally suited for domestic use. In total, the model has three clamps. She uses a wired type generator, and the element overload parameter is 3.5 A. Capacitors are used to protect the device of the operational type. In total, the model has two sensors. The threshold sensitivity parameter is 5 mV. The working frequency of the modification does not exceed 560 Hz.

The minimum allowable temperature of the phase sensor is at -20 degrees. According to experts, the LED in the device rarely burns out. Also, the advantages of the model include high battery capacity. In offline mode, it is able to work for more than 10 hours. The price of the presented phase sensor fluctuates around 6500 rubles.

phase rotation indicator

LUXEON EWR-5010 Reviews

This phase rotation indicator is sold on two terminals. He has an automatic calibration function. Also, the advantages of the device is important to include compactness. The holder of the model is used with a protection system. Capacitors installed pulse type. In total, the model has two sensors. Thus, the phase detection rate is very high.

It is also important to mention their sensitivity. The specified parameter is at least 5.3 mV. The operating frequency, in turn, is at 650 Hz. The minimum permissible temperature of the phase indicator is -25 degrees. The clamps in the device are used in high quality. Also, experts note the strength of the conductors. The microcontroller in this case is missing. You can buy this phase indicator nowadays at a price of 7200 rubles.

Description of models LUXEON EWR-5033

This phase indicator has many advantages. First of all, it is important to note that he has very convenient clips installed. For working with power plants, the model fits well. Permissible humidity level of the device is 45%. The capacitors of the model are used pulse type.

Also, the advantages of the modification include a high-quality sensor. The generator in the phase indicator is used at 3 A. For household use, the model is also suitable. However, it is important to note that it is quite expensive in the market. On average, the price of the phase indicator fluctuates around 8300 rubles.

phase indicator

Consumer Reviews for DC Model JJDC0148

This phase indicator is made with two sensors. The clamps of the model are made of high quality. The sensors are equipped with an amplifier, and the phase detection rate is very high. The model has an automatic calibration system. The threshold resistance of the modification is 45 ohms. In this case, the minimum permissible temperature of the phase indicator does not exceed -15 degrees.

The model’s battery is used for 120 Ah. The microcontroller in the presented modification is not provided. If you believe the experts, then for household use the phase indicator is suitable. Many experts believe that the device can work for many years. Problems with the LED are rare for him. You can buy this model in a specialized store for 6400 rubles.

DC device review JJDC0110

The indicated phase indicator on the LED is manufactured with two clamps. The sensors in the model are used at 5 mV. If you believe the experts, then there’s enough lasts for a long time. Directly capacitors are used pulse type. There is no microcontroller in the model. According to experts, the device is suitable for working with power equipment. The operating frequency of this modification is 340 Hz. Permissible humidity level is 55%.

phase indicator

Vibration function is not provided for the model. The minimum permissible temperature of the phase indicator is at the level of -25 degrees. The amplifier in the presented device is missing. This model weighs only 0.3 kg, and is quite compact. You can buy an indicator of the phases of this series for 5700 rubles.

Description of DC models JJDC0112

This phase indicator is made with three clamps. In total, the model uses two sensors. The phase detection speed is 3 seconds. There is no automatic calibration function. According to experts, the model is not suitable for working with power equipment. The generator is used at 3.5 A. The parameter of the current overload in the device is negligible. Permissible humidity level fluctuates around 56%. Capacitors are used to protect the system operational type. You can buy this phase indicator on the market for 6300 rubles.

Source: https://habr.com/ru/post/K20568/


All Articles