Some sliders with a retractable screen and navigation are very difficult to connect. In this case, it is important to consider the type of adapter, as well as the presence of an adapter. Many models are manufactured without a switch. In order to install the device yourself, you will need to purchase it separately.
It should also be borne in mind that the connector for the battery can be without an adapter. Many models come in four speakers. In this case, you need to know the design features of the panel. In order to understand this issue in more detail, the most popular modifications should be considered.
Connecting the Alpine 9881
This radio can only be connected through a three-wire adapter. First of all, you need to find the pin connector. Only the blue adapter is allowed to connect to the adapter. Two wires depart from it. For speakers, a blue adapter is used. To connect it, you must use an extension cord. In some cases, the contactor may not fit the stereo system.
In such a situation, the type of output connector must be considered. For some cars, an old-style adapter is moving away from the panel. In order to solve this problem, you must purchase an adapter with a head. It should fit under the stereo connector. At the end of the work, the rear speakers are connected.
Installing the GT M11
Connecting these retractable screen recorders is fairly simple via a three-pin adapter. In the standard kit it is available with conductors of different colors. First of all, experts recommend connecting a stereo system. In this case, you will need an adapter with a red output. It is also important to connect the extension cord before connecting. The rear speakers are connected last.
A green adapter is used to secure the subwoofer. In this model, it is turned on through the receiver. The unit is directly connected via the blue stereo connector. The rear speakers can be connected through the remaining black adapter. In this case, two wires depart from it. A purple contact is used on the rear left column. In order to connect the right speaker, there is a yellow wire.
Connecting a GT M15 radio
Connecting the specified radio with a retractable screen (photo shown below) is quite simple. The standard model kit has three adapters in different colors. The stereo system is connected to the car in the first place. To do this, check the output connector, which is located on the panel. With a two-pin adapter, everything is pretty simple. However, if a different type of element is used in the car, then the task of connecting the radio is much more complicated.
Many experts in this situation recommend buying a contactor. The specified part will help to connect the adapter, as well as the adapter that is installed in the car. When connecting a stereo system, it is important to pay attention to the output connector. The wire to it must be connected precisely in blue. In this case, an extension cord is not required for connection. After installing the stereo, you can proceed to the speakers. To this end, take the green adapter.
A gray wire is provided on the left column. The adapter itself must be near the adapter. At the end of the work, it should be hidden behind the stereo system. However, before that, it is important to connect the right speaker. To do this, take the yellow adapter. The wire for the connector is selected with an extension cord. The output for connection in this case is also colored in yellow.
Connecting the Prology DVS-2135 Model
The specified radio with a retractable screen and a navigator on the market is presented with two adapters. In this case, the device is connected to four columns. First of all, it is important to remove the previous radio and carefully inspect the output jack. Some vehicles may have a regular plug-in adapter.
In this case, the radio should be connected through the red conductor. To do this, first of all, you need to check the battery output. After fixing the green conductor, you need to start connecting the speakers. To this end, many experts recommend using a contact receiver. In the store, it is sold with clips. If you connect a subwoofer, you will need an adapter with a double.
Installing EasyGo C200
The specified radio tape recorder is connected to the car with a retractable screen through a contact adapter. The device comes with three wire boxes. First of all, it is important to deal directly with the stereo system. For this, a blue contactor is removed. He must connect directly to the battery connector. In some cases, the adapter may not fit the output. In this situation, a three-wire adapter is used. To connect the speakers there is a blue conductor. A speaker with a red output is used to connect the speaker.
Connecting the EasyGo C300 radio
You can connect these car radio with a retractable screen yourself. First of all, it is important to check the configuration of the device. The standard model kit has two contactors. Directly adapters are supplied with wires of blue and red colors.
If a three-output adapter is used in the connector, a fuse is required for the adapter. In this case, the speakers are connected last. A red contactor is used to connect the subwoofer. In this model, it is installed with two green wires. A blue conductor is used on the left speaker.
Photo with the connection of the EasyGo C500 model
Installing a radio with a retractable screen does not take much time. First of all, you need to make sure that you have a three-pin adapter. In this case, the stereo system is connected via the red adapter. Blue and gray wires extend from it. An extension cord must be used on the battery connector. In order to connect the front speakers, a red adapter is used. The adapter in this case is used for three contacts.
A gray conductor is connected to the left speaker. Before turning on the stereo system, check the insulation quality. A blue conductor is connected to the right speaker. The rear speakers will require a yellow adapter. Red and blue conductors are standard. There is a red exit on the back left knee. In this case, the conductor is connected via an extension cord. The blue column is used for the right column. At the end of the work, it remains to connect the subwoofer. This can be done through the contactor.
Installing the JVC KW-V11
These retractable screen recorders are manufactured with a standard adapter. The stereo system comes with two adapters. In this case, the contactor is used with four connectors. The stereo unit is connected first. For this, the first adapter is taken. The output is painted red. A second adapter is used to connect the speakers. In total, he has three wires. In order to connect the rear speakers, a contactor is required.
Connecting the JVC KW-V13 radio
The indicated radio with a retractable screen can be connected through a conventional adapter to two contacts. In order to install a stereo system, an adapter with a red connector is used. In this case, many experts advise to pay special attention to insulators. They should not be in contact with the stereo unit. The front speakers use a green adapter with black outputs.
The left column of the car is connected using the yellow wire. The right speaker has a green connector. In order to connect the rear speakers, an adapter with a blue output is used. A separate connector is provided on the subwoofer in the unit. The exit under it is painted in blue.
Connecting the Sony XAV-701 Model
These retractable screen recorders are only connected via a contactor. There are two adapters in the kit. Stereo adapters should be used in red. In this case, two wires depart from the adapter. There is a blue connector on the left speaker. For the right column, a gray conductor is used. The subwoofer can be connected to the indicated radio via a contactor.
The wire for the connector is taken in red. After connecting the subwoofer, connect the rear speakers. This is done only through an extension cord. First of all, it is important to note that the adapter for the rear speakers is used in blue. The red wire must be connected to the left column. There is a yellow connector on the right speaker.