Many people are often interested in how to disassemble a wardrobe for moving. And this is really important. Even if you do not move, you will still want to change the atmosphere by updating the interior. No piece of furniture can stand in the same place for half a century. To move furniture or move it to another room, sometimes you have to disassemble it. But what about those who were going to move due to unforeseen circumstances and had just bought a new wardrobe? Do not leave him!
There is a solution, and it, no matter how trite it may sound, lies in a simple dismantling of the structure. To cope with this task, it is worthwhile to study the disassembly instructions in detail, because the cabinet must not be disassembled even because of inconvenience in transportation, but because when moving to a new place, some sections or structural details can be damaged, spoiling the appearance of the interior . This is sad, especially if it's new.
Your attention is presented with a simple guide that describes the main stages of disassembling the structure and comprehensively answers the question of how to disassemble the wardrobe.
What does the general dismantling scheme look like?
In order to understand the issue and subsequently complete the assembly correctly, special knowledge or skills are not needed. When starting such a job, it is worth remembering one important feature. In the manufacture of sliding wardrobes by various manufacturers, various modifications of parts are used as fasteners and accessories, each of which is characterized by its own characteristics. Therefore, when dismantling furniture, the main thing is not to rush. Everything else is easy to figure out without spending a lot of time solving the problem.
So, how to disassemble a wardrobe. The general scheme consists of several stages and is as follows.
We remove facades
Be guided in this work by the simple rules described below. They will help to do everything right.
The subtleties of dismantling are that:
- Swing doors can be removed quite easily. They are kept on hinges, because here you will need a screwdriver with which to loosen the screws. They are located on each loop from the side of the side panels. After which the facade is removed without difficulty, it is important not to drop it.
- With the lower supporting doors, things are even simpler. They are lifted up, not forgetting to open the locks on the wheels on the bottom before that, and with a smooth movement they are moved down and onto themselves. Then pull out the "rollers" from the upper guide.
- With hanging doors, solving the question of how to disassemble a wardrobe is more difficult. It all depends on the type of suspension for the rails, which, as you know, can be mounted under or above the roof.
- Lower rollers often hide under or above the floor. Each type of wheels is disassembled in its own way, so the procedure is somewhat different, but the principle remains unchanged: lift the door, remove it from the guide from the top of the support wheel, and then from the bottom, holding the bar, pulling the canvas slightly down and toward you.
Dismantling the back wall
You are getting closer to answering the question of how to disassemble a wardrobe with your own hands. After the facade is removed, you can proceed to further dismantling, namely, removal of the rear wall of the product:
- It happens that the back wall is tightly screwed to the ends of the shelves and the base of the cabinet, so in this case you have to tinker and remove all the fasteners. This will provide an opportunity to move forward according to plan.
- When the back wall is attached to the grooves of the side walls and the cabinet cover, leave this step in the end and return to it when all other work is completed, namely, the frame is disassembled.
We remove the shelves of the cabinet
The next step is to remove the shelves, which are located horizontally and used to store things, and in relation to the side walls and partitions in a perpendicular position.
For their fastening, the most diverse accessories are used, therefore they are also removed using distinctive technology. For example:
- Shelves seated on eccentrics are dismantled with a Phillips screwdriver and are located directly under the shelf. They are unscrewed clockwise, and the shelf is removed upward.
- When using European-style screws as fasteners, first the screws are unscrewed from the ends (for this you will need a hexagon), and then the procedure is repeated, only from the side.
- When dismantling shelves of furniture assembled on hexagons, first open the covers of the plastic parts, and then unscrew all the screws.
Case for small: the dismantling of partitions
To disassemble the built-in closet, it remains only to dismantle the partitions and sidewalls, following the principle described above, which is used in working with shelves. When disassembling standard furniture, you will definitely not get confused. Therefore, problems should not arise in resolving the issue related to how to disassemble a wardrobe, and then assemble everything back, moving it or moving it to the right place.
What to consider during dismantling?
Please note that when moving to dismantling the door, you should be extremely careful. Here, each mechanism is removed separately and preferably in the sequence described below:
- closer;
- locks and slings;
- each of the guides;
- bottom rollers;
- all fasteners that can be detected;
- sash.
Now you know how to disassemble a wardrobe, but do not forget that both the dismantling process and the assembly of any product, not just a wardrobe, require accuracy. Strictly adhere to the instructions so as not to make a mistake in any action and not to damage the furniture. Remember, the more carefully you disassemble, the easier it will be to return everything to its original form.