No matter how high-quality a wooden bed is, sooner or later it will begin to squeak when moving, interfering with sleep and rest and just unnerving. With all the comfort of the bed, such a tangible minus as a creak will be a reason for the deterioration of sleep quality, and hence human health. At the same time, changing this bed to a new one is not the most economically viable solution. In most cases, it comes to fixing furniture and eliminating the auditory irritant that appears if the wooden bed creaks. How to fix this so that you can continue to use your favorite bed for many more years?
Reasons for a creaking bed
It is quite possible to get rid of a creak without being a furniture specialist. However, if a wooden bed creaks, you can solve the problem only by first understanding why the furniture makes these unpleasant sounds.
Most likely, this is due to the natural drying process of the natural material - wood. An equally common reason may be that the fasteners of the bed parts weaken over time.
But you should exclude the sound that may come from the old mattress, as in this case it turns out that this is not a wooden bed creaking. What to do to understand if the mattress is to blame? It just needs to be removed and laid on the floor, after which lie down and move. If there is no creaking, then you need to continue researching all parts of the bed: slats or boards under the mattress, without exception, all the docking places, as well as the frame and legs. As soon as the place or places of the defect are detected, you can begin to act in accordance with what exactly causes the creak.
Loosening Mounts
The weakening of the fasteners is the most common cause of an unpleasant sound, since all materials, without exception, tend to wear out, and over time, one part begins to wear and come into contact with the other more tightly than was provided by the design. In addition, due to movement and weight acting on the parts, the fastening density can also weaken. In such cases, it is enough to tighten all the nuts and bolts.
But it happens that from time to time they are no longer able to withstand the load on their own, and the wooden bed creaks. What to do in such cases? It is necessary to put additional fasteners. For example, special corners made of wood or metal, which should be screwed onto the other side of the furniture. Instead of corners or in addition to them, all joints can be strengthened with carpentry glue.
By tightening, strengthening and letting the glue dry, you can check whether the creak has disappeared. If it remains, you need to use one of the types of lubricant that covers the joints of the bed to eliminate the friction of all the wooden parts of the frame. You can use special silicone grease, solid oil, paraffin and even ordinary soap. These works must be done carefully and very carefully, since the risk of damage to the upper protective and decorative layer of wood is high.
Joint sizing
A very good proven way to eliminate the creaking of the bed is to use rubber glue to seal the holes that make the bed creak. The glue remains flexible enough and at the same time reliably holds the filled space. Use this method according to the following instructions:
- Disassemble the bed into the smallest possible parts to assess the degree of wear.
- Degrease all joints with any alcohol, allow it to evaporate.
- Apply rubber glue carefully to each prepared part.
- Immediately after application, we collect and make a wooden bed back and, putting it in its usual place, wait for the glue to completely dry, in accordance with the recommendations on the package.
After this, the creak should not remain. The only drawback of the described method is that the glue between the elements will not allow in the future to easily disassemble the bed again.
Reiki
The same slats on which the mattress is located is no less popular reason why it happens that a wooden bed creaks. What to do in this case? You can fix the problem only by replacing the old defective rails with new ones or try to swap the old rails in places.
Legs
It happens that the reason for the creak lies in the legs of the furniture. This defect is the most difficult task for home repairs. Legs, of course, can be replaced with others, but installing them can be quite difficult even for professionals. But you can simply remove the legs, for example by cutting them off, without special skills and tools. In addition, instead of a tired classic bed, the result can be a new fashionable and original element of the interior - a platform for sleeping and relaxing, standing directly on the floor.
A visual change of scenery, stability and elimination of squeaking in this way can be achieved simultaneously. Of course, this solution is not suitable for everyone, but you can still consider it. Who knows, maybe one of the relatives will wake up the talent of a room designer, and a platform bed will become the most favorite piece of furniture in the house.
What else can you do if a wooden bed creaks
What to do for those whom the listed methods did not help? You can get rid of a squeak without resorting to radical measures if you try to apply the following tricky decisions:
- A thick pillow laid between the wall and the headboard as an additional shock absorbing support, significantly reducing the strength of the skip.
- A small layer of any dense material between the frame and the net or bed rails.
- Special covers worn on furniture legs.
- Checking the position of the mattress (moving out may make noise).
Thus, having discovered the cause of the creak and knowing what to do if the bed creaks, you can stop this annoying misunderstanding and use your favorite furniture for a long time without extra costs.