Well, which of the users of modern PCs or laptops did not encounter a problem when the computer or the same laptop hangs. Little of! The problem often lies in the fact that the Winchester began to “crumble”. Change it? Costs, and considerable. But the HDD Regenerator utility, if not all 100, then 99% will be able to restore the hard drive. Let's see what it is.
What is HDD Regenerator for?
Initially, as some users suggest, the application was created exclusively in the likeness of the “native” Windows utility for standard hard disk checking, because in most cases it is not only the cause of system failures, but also a device that cannot store information for a long time.
The program HDD Regenerator Windows (in the sense - "OS" itself) initializes perfectly. This is not even a matter of the system, but of a minimal amount. The fact is that the simplest version of the HDD Regenerator in Russian "weighs" only 8.8 MB. And this is subject to her capabilities!
Principle of operation
But let's see what this utility is capable of, because many experts call it almost the biggest discovery in the field of computer technology over the past half century.
It used to be that if they begin to interfere with the operation of a hard drive, it will most likely have to go to a landfill. HDD Regenerator application (the Russian version is a dream of many) can not only fix errors, but also, as claimed, restore damaged sectors of the hard drive on a physical level. Do you believe in fairy tales? Let's see where the truth is and where the lie is.
The program interconnects the transmitted signals of the high and low power readout laser with short pulses, which, interacting at such a level, create a magnetic field. Thanks to precise “shots” for each damaged cluster or partition of a disk (namely a hard disk), the so-called magnetization reversal effect is achieved. It should be noted that the data of any cluster remain intact, which completely eliminates information interference.
How this happens is still a mystery to many users, moreover, even experts wonder how it was possible to come up with such a technology. With all this, many note that the program itself has a fairly powerful resource, although it works in a non-standard mode (which, incidentally, confuses many very much).
Install HDD Regenerator: Russian full release
Let's start with the installation. It is best to download the paid version of the program from the official website (hddregenerator.net). But! Most often in Runet there is an unofficial copy that can contain three files: the installation distribution kit itself, an additional descriptive file with the extension .txt or .nfo, and also a special executable patch. Antiviruses often recognize it as something worthless, even if all three objects are located, for example, in the RAR archive.
It turns out that our user needs to install the English version, and then, as it is called, simply patch it. Please note that this procedure is by and large illegal, since the paid version of the HDD Regenerator Rus package is quite expensive, but this, unfortunately, only applies to the installer.
Whatever anyone claims, there is no program with a Russian-language interface, since it works in command-line mode through something like DOS.
Operation Overview
After installing and starting the program, the main window opens, in which we are first interested in two main sections: disk scanning and creating bootable USB. If the system is still responding, we use the first option.
HDD Regenerator allows you to perform several types of actions, in addition to viewing information. The first is a regular scan. The second - scanning and correction, the third and fourth - displaying reports and statistics.
Scan and Restore
If you start with the simplest thing, after starting the utility, you can simply press the number "1", which should be entered in square brackets in the "dos" window. Note that this is exactly like DOS, and control can only be done using the keyboard (the mouse is completely disabled in this situation).
Now let's look at issues related specifically to automatic recovery. To do this, select “2” in the main window of the running utility. This is where the biggest difficulties begin. Depending on the size of the disk and the degree of damage, not just a fix, the scanning process itself may take hours. Therefore, before starting the utility, it is recommended to start using standard Windows tools in the form of a command line, where the sfc / scannow command is written.
USB boot
But if you take into account the possibilities of the first launch of the application, you can also choose to create a bootable flash drive from the start menu. The program will determine the existing USB-drive, and then copy to it its own boot files.
Please note: the flash drive must have a capacity of at least 1 GB, and in the BIOS after copying the data, the boot priority of First Boot Device: USB must be set. But far from all users know that when rebooting, the flash drive must first be inserted into the port, and only then turn on the computer or laptop.
Otherwise, the device will not be detected even when the boot is enabled in the BIOS. In this case, when you restart, it will not start Windows, but our program.
What you should pay attention to separately
Now a few words about what should not be done. Of course, the HDD Regenerator program itself in the active state shows the user some additional operations in the sense of their activation by pressing certain keys. The saddest thing is that many users, seeing that the process takes too much time, follow the recommendations of the utility and press the Pause / Break button on the keyboard.
Doing this is not recommended categorically, otherwise even the developer does not guarantee that the scanning or recovery process will end successfully (and whether it will end at all). You should also not pay attention to some “hangs” of the application in the process. This is a normal occurrence.
In addition, sometimes in the process of scanning a hard disk (note, not a disk logical partition), the monitor screen can generally go blank for several minutes without any reaction. This is also normal. The process, if not violated, will recover by itself.
Instead of a total
As you can see, the HDD Regenerator program itself is nothing complicated in terms of installation or use. But many experts recommend using it only as a last resort. In addition, you need to look separately at the verification statistics. If the number of expectations (delays) of requests to access Winchester clusters is expressed by a too large two- or three-digit number, the hard drive will have to be changed. Here, no remagnetization will help.
On the other hand, some hard drive creators advise using the HDD Regenerator application (extended paid version) paired with a unique utility for checking the mentioned devices and fixing errors on them called Victoria, as it turns out, from a Belarusian developer who literally blew up the world with his program.
In general, you should approach the issue of hard drive regeneration very seriously, otherwise there can be a lot of problems, especially if you run the software in safe boot mode without first creating a bootable flash drive. But in general, there should be no problems. And all these processes do not carry any serious consequences or threats to the disk itself or the installed system.