Attention fishing enthusiasts on the shelves of specialized stores offers a wide selection of gear. In an effort to ensure a good catch, experienced fishermen resort to various tricks. The gear they have acquired is being upgraded and improved.
Clumsy machinations with fishing line lead to a decrease in its strength by 50%. Information on how to knit knots correctly and how to attach a carabiner to a fishing line is presented in the article.
About fishing line
Before you attach the carabiner to the fishing line, you need to familiarize yourself with its design features and properties. The structure of the fishing line is heterogeneous. It is woven from several synthetic fibers. Fishing lines come in two forms:
- Monophilic. Their production uses nylon. Such fishing lines are transparent and colored. Structurally, they consist of a single thread. They have a high coefficient of elasticity and are prone to stretching. Fishing lines can withstand strong jerks, but are not designed for long loads.
- Wicker. Consist of woven nylon fibers. They are characterized by increased strength and minimal elongation. Withstand heavy loads. Products are intended for long casts.
Acquaintance with a carbine
The novice fisherman should remember that the use of additional binders leads to a decrease in the strength of the fishing line. Therefore, they must be used very carefully. In some cases, binders are indispensable. One such device is a carbine. It can be wire or plate. Often beginners are interested in how to tie a carbine to a fishing line? This moment is very important, since the task of this small device is to make the fishing process as convenient as possible. Thanks to the use of carbines, twisting of the fishing line is prevented. In addition, according to the fishermen, in the presence of these devices gear is much easier to change. Therefore, every fisherman should know how to knit a carabiner to a fishing line.
The Executioner's Knot
For those who do not know how to attach a carbine to a fishing line, experienced fishermen recommend using the main unit. People call him “executioner” or “Lynch knot”. It is simple to execute and reliable enough. It will be easy to perform it if you adhere to the following sequence of actions:
- Thread the fishing line into the eye of the carabiner.
- Make two loops that should be directed in different directions. It is necessary that the carbine be in the second of them.
- Wrap the loop with the binder with the free end of the fishing line. The number of such turns should be at least seven. After each turn, the end passes through the loop.
- Tighten the loop closer to the bonding element.
- Trim the remaining piece of fishing line.
Offshore swivel-knot
Who does not know how to tie a fishing rifle, can use another way to make a knot. This technology is called Offshore swivel-knot. The installation of the mounting device on the fishing line is carried out in several stages. At the very beginning, you need to make a loop. Since in the future it will need to be inserted into the eye of the carbine, its length should be at least 100 mm. During the assembly process, the carabiner should be held so that it hangs, and the loop and its ends are directed upwards.
Then the carabiner must be rotated several times around its axis. As a result of this wrapping, a knot is formed. Before tightening it, experienced fishermen recommend wetting it thoroughly.
Double clinch
This node is not the main one. Nevertheless, some fishing enthusiasts are interested in how to attach a carbine to a fishing line with this knot. The technology itself for its manufacture is simple. First you need to stretch one end of the fishing line twice through the mounting ring, thus forming a loop.
Then wrap it several times around the fishing line. One end must be passed through the knot. The result is two nodes. In the same way, the end of the line is drawn through the second. After performing these steps, the free end and tackle are pulled in different directions. Thus, the tightening of both nodes. The rest of the fishing line is carefully cut.
About the varieties of the clinch node
Judging by the numerous consumer reviews, the most common is a double node. However, there are several more options for the “clinch”. If necessary, the fisherman can take advantage of:
- Single node. With its help, spinners, a hook and a swivel are attached to the fishing line.
- Single lock. Used for sliding floats.
- Double. Designed for fastening to fishing line mainly carbines.
- Hardened. This node fixes a fishing hook. Matches in case of expected high load.
- Superior. The unit is designed for fastening boat anchors.
How to tie a carabiner to the fishing line with the Palomar knot?
This unit can be attached to a braid or ordinary fishing line carabiners, hooks and swivels. "Palomar" is universal, as spinningists still use it for the installation of artificial baits. It can be made easily and quickly, performing the work as follows:
- Fold the fishing line in half and stretch it into the carabiner ring. It can also be a hook or bait.
- Make a loop and skip the end of the line into it. You do not need to tighten it.
- At the point where the double-fold fishing line is bent, thread the mounting device.
- Moisten the fishing line and tighten the loop.
According to experienced fishermen, this knitting technology has one drawback. It consists in the fact that this method entails shortening the length of the leash.
About Lindemann Technology
The above methods of knitting knots are suitable for working with fishing line-braid. Mondeophile is also suitable for Lindemann. To make a node, you must perform the following steps:
- Pass the line through the carabiner ring.
- Make a loop and bring the forest back. The carbine is knitted using a loop in which one of the sides is double. The free end of the line is wound around it. The number of turns depends on its thickness. The thinner it is, the more turns it will need for it.
- Tighten the knot. The remaining free end can be trimmed.
Finally
Fishermen use knots made in a variety of ways. As new tackles appear on the shelves, more complex knot technology is developing. The first two methods are considered classic, basic. Before starting to learn new techniques, it is advisable for a beginner to master the “hangman's knot” and Offshore swivel-knot.