Now on the domestic market there are a lot of equipment that provides the necessary climatic conditions in the room. It can be either wall-mounted devices or more modern elements. One of such devices is a mobile air conditioner, the installation of which does not take much time and effort. We consider in detail all the advantages and disadvantages, as well as technical specifications and installation features.
general information
Such a climate system appeared relatively recently, but has already managed to earn a lot of positive reviews. A mobile air conditioner, the installation of which is simple, is highly reliable and economical. To understand how it functions, it is necessary to consider its design. Compared to other devices, it has several advantages. First of all, it can be installed independently.
No need to call specialists who require an impressive amount from the owner. However, to install on your own you need to have certain skills. For clues, use the instructions for installing a mobile air conditioner. Therefore, the installation of this equipment is possible at home. Moreover, you can save money.
What is a mobile air conditioner?
Before starting the installation of this equipment, you need to get acquainted with its design and other features. This climatic device can also be called a monoblock. It serves to heat the air and supply it to the room. All components are located in the housing, so the outdoor unit does not exist. In order to conveniently move the device around the room, wheels were fixed on its body. That is why it is chosen by most users.
The mobile air conditioner, which is installed indoors, has a compressor. It is not taken out into the street, as with ordinary analogues, but remains in the room. This design has positive reviews.
Standard mobile air conditioning provides the following functions:
- heating or cooling air to a certain temperature;
- drying it;
- space heating;
- ventilation.
Principle of operation
During engine operation, excess heat is generated that must be removed.
For this, a standard mobile air conditioner is equipped with a corrugated pipe. It is displayed through a window or door to the street. This process, namely the removal of warm air, must be carefully thought out. If this is not done, then the efficiency will be low for a device such as a mobile air conditioner. This type of installation has a drainage system. It is necessary to collect the condensate produced. The process is carried out in two ways:
- condensate is collected in a special container, it must be periodically emptied;
- condensate is collected in a special tube that is in a special container, the filling of which also needs to be monitored.
We can say that the candy bar is similar in structure and principle of operation with conventional air conditioners. But there are significant differences, which will be discussed below.
DIY mobile air conditioner installation
Most people find this equipment easy to install. Of course, the installation of a mobile air conditioner in an apartment is different from the work that is carried out for standard split-system air conditioners. But for these purposes, certain skills and knowledge are still needed.
The main feature of the monoblock is that when you purchase the device, certain services of installation specialists are offered. First of all, it is necessary to bring the warm air produced by the compressor to the street. Therefore, a special window insert is made.
To install a monoblock in the room, you need to purchase some materials and equipment:
- A sheet of dense plastic having a thickness of more than 9 mm. This material is used to isolate cold air from warm, which is indoors.
- A device for sawing solid material, namely a sheet of plastic.
- Adhesive tape or masking tape that can withstand a piece of plastic on a window.
- Foam, which provides protection against penetration of water and air.
How to get started?
Before starting installation work , a clear plan of action should be considered.
If you have special skills, you can draw a mini-project. As a rule, the installation of a mobile air conditioner is carried out next to the window. In this case, air resistance decreases several times. It is also necessary to monitor the hose. It should not have fractures or other mechanical damage.
Making a window insert
As mentioned earlier, the installation of a mobile air conditioner in the window is carried out using a plastic insert. So, the process begins with measuring the dimensions of the window. Next, find out the diameter of the duct. Using a pre-prepared tool (saw or scissors), a window insert is cut out in accordance with certain dimensions. The result should be a rectangle of plastic. A hole is made in the center that corresponds to the diameter of the corrugated pipe. The duct must fit snugly against the walls of the opening.
Ensuring tightness is an extremely important process. Installation of a mobile air conditioner begins with a window insert. It is the only obstacle to cold air and moisture coming from the street. To ensure reliable sealing, use silicone sealant or polyurethane foam. Any of them can be purchased at a hardware store.
Installing a mobile air conditioner in a plastic window
The installation of the plastic insert is carried out in the following order:
- open the window and lock it in this position;
- apply a self-adhesive tape or sealant to the plastic insert;
- attach the insert in the window frame.
A mobile air conditioner, the installation (a photo of such devices can be seen below) which is described in the article, can be mounted by almost every home master.
How to do it yourself? Ways to install mobile air conditioners are very simple.
After completion of the preparatory work, installation of the apparatus is started. First you need to choose a future installation location. After that, one end of the duct is inserted into the plastic window insert, and the other to the exhaust outlet of the equipment. A mobile air conditioner, the photo of which can be viewed in this article, must be turned on after the device has been idle for more than 3 hours in an upright position. This ends the process. As you can see, there is nothing complicated in it. If you have certain skills and a simple bench tool, the procedure can be completed in a short time.
Installation Rules
Installing a mobile air conditioner is a relatively easy process, but there are actions that you cannot perform:
- turn on the system through a do-it-yourself extension cord;
- arrange grounding to the gas pipe;
- mount the air conditioner in the bathroom;
- block the space near the device;
- connect to a grounded outlet;
- give direct access to the mains.
If there is no time and desire to install the air conditioner with your own hands, you can call specialists. However, you will have to spend money on paying for the work.
Any equipment has advantages and disadvantages. Mobile air conditioning was no exception. Despite the fact that there are more positive sides, we will consider each view in more detail.
Advantages of the mobile candy bar
Among the positive qualities of the device are the following:
- Mobility. Such devices have small overall dimensions and weight, which allows them to be transferred and installed in other rooms. In the winter season, air conditioning can be assembled and put before the onset of hotter weather.
- Easy installation. Installing a candy bar does not take much time and effort. All you need is tools and basic skills. The installation process is described in the article.
- Saving. How can I save? First of all, at the installation. It can be done independently. When installing a split system, a lot of dust and noise is generated, and all this costs a certain amount of money. This will not happen here. In addition, the device itself is much cheaper. Its price ranges from 10,000 to 50,000 rubles.
Disadvantages of air conditioners
Monoblock must be constantly monitored. As mentioned earlier, when the compressor is running, condensate is produced, which is collected in a special container. Therefore, it should be emptied periodically. If the container with the capacitor is full, the device will cease to function.
The next drawback is the noise generated.
It is significantly higher than the operation of an air conditioner split system. This is due to the fact that the compressor is not on the street, but in the room. In terms of noise characteristics, they are similar to cooker hoods. Therefore, you should endure it to maintain a comfortable environment.
When the monoblock is working, a lot of warm air is released, so it needs to be vented to the street. This is done using a corrugated pipe that is led out through a window or door. As a rule, it is included. Its length is too small, and an increase threatens with a loss of productivity.
Despite the negative aspects, many users are satisfied with its work. Its main advantages are ease of installation, mobility, cost, as well as high rates of creating optimal climatic conditions. Various models are widely represented in the domestic market.
Reviews
Many users of mobile air conditioners note their high performance as well as ease of installation. For installation you will need basic skills. To ensure comfortable climatic conditions in another room, you just need to move the device.
Among the positive qualities, low cost is distinguished in comparison with split-system air conditioners. Its cost is in the range up to 50,000 rubles. It depends on performance and other specifications.
The biggest drawback is the noise generated. This is due to the fact that the compressor is not located on the street, but indoors. However, to ensure comfortable climatic conditions will have to be patient.
Conclusion
Mobile air conditioning is a great device for ventilating a living area.
Despite the negative aspects of the device, it is still popular among many users. You can save on its installation. To do this, you need to have simple tools and basic skills. The low cost hides a high-quality device that will create comfortable conditions in any room.
So, we figured out how to install a mobile air conditioner.