Most fishermen start their fishing trip with a fishing rod. However, not everyone knows how to ship the float correctly. Many people face a problem when it seems to them that the float on the water is behaving incorrectly. But after all, what kind of fishing will depend on the float and its shipment.
Why do I need to ship the float correctly?
Many anglers often ask the same question: "How to properly ship a bobber on a fishing rod?" This is not in vain. After all, the sensitivity of the bite directly depends on this. As a result, the angler can more easily see the bite, and the fish will not particularly resist. Therefore, experts recommend shipping the float in such a way that only the antenna sticks out of the water. Even during strong winds, it will remain motionless. Even if he moves to another place, he will still be visible above the water.
How to ship correctly?
Most beginner anglers are interested in how to properly ship the float. After all, this process is very important for fruitful fishing. To make it easier to do this on a river or lake, you need to prepare in advance at home. During the preparation of equipment before attaching each new part, the structure must be launched into the water (you can use a two-three-liter jar). If you assemble the structure in a pond, you will also have to constantly immerse the float in water after each new fastening. This is necessary in order to assess how loaded the float is and whether more cargo is needed. So you need to ship the float to the most suitable level (usually to the base of the antenna).
How does the antenna affect diving
Many are interested in how to properly ship the float, but this process also depends on its type. When buying a design, you need to pay attention to the float. It will also matter how the antenna is installed, what material it is made of. Indeed, in some cases, it is made from a single piece, so it won’t swim. After all, when shipping a float with a hollow antenna, you need to make sure that only a small part of it (only ) remains above the water. And if the antenna is created from a single piece, then you only need to slightly immerse it in water. Only in this way the fish will not feel the resistance of the float, so the bite will be as effective as possible. If the antenna without buoyancy is too much immersed in water, this will lead to heavier gear, but will not affect the sensitivity of the float.
Setting up gear for long casting
Before you properly ship the float for long casting, you must configure the gear. To do this, dial a can of water and start setting up a fishing rod. Attach a fishing line with the same diameter as the fishing line used on the tackle to the float. In the lower part of the fishing line, weights should be fixed so that the antenna takes the desired position. However, it must be remembered that the hook with the nozzle has its own weight, which can also affect the immersion of the float in water. After the necessary number of sinkers has been selected, you can begin to collect gear. Large sinkers need to be placed on top so that they are as close to the float as possible. Immediately they should not be tightly clamped, as this can ruin the fishing line. Light weights can be attached to the float itself.
By performing this design, you can avoid tangling the fishing line. Due to the fact that the sinkers are not fixed immediately, they can be moved along the fishing line until they occupy the required position. After that, you can squeeze the sinker to the end. But it is not recommended to press strongly, as you can ruin the fishing line. Of course, the bite will be in the event that it is incorrect to collect the gear. Nevertheless, many are interested in how to properly ship the float. The fact is that with the correct collection of fishing rods, you can catch large fish, and not small things.
Shipment of a float for crucian carp and roach
Most fishermen use one weight instead of several small ones. If you need to know how to properly ship the float to crucian carp, you should use several weights, and not just one. Moreover, all of them must also be correctly distributed. After all, one big weight creates a big noise, which can scare crucian carp. Therefore, if you distribute the sinkers on the fishing line correctly, then they will gradually enter the water.
Some are interested in how to properly ship a float to a roach. But to catch this fish, it is necessary to throw the float relatively far. In this case, it is necessary to use heavier sinkers. You need to place them near the float, and a little higher - a few more pellets.
What to use: pellets or sheet lead?
When deciding how to properly ship the float for the flow, you need to decide what to use: pellets or lead? Opinions on this subject are divided. When fishing for roach, it is recommended to use pellets, as this allows you to load the float as much as possible. Moreover, this fish is characterized by high caution, and with the help of grains the float will enter the water almost silently. When fishing for crucian carp or perch, it is quite possible to use sheet lead.
You can even combine loads. However, one basic principle must be taken into account: the closer they are to the hook, the less weight they must have in order not to scare away the fish. That is, it is better to use several small weights than one large one.
If the street is wind
In windy weather, the question of how to properly load a sliding float becomes relevant . Indeed, a strong wind interferes with the fisherman. Due to the waves, the antenna will either plunge into the water or exit it. In order for fishing to be successful even in windy weather, you need to try to unload the float. This will lead to the fact that not only the antenna will stick out of the water, but also part of the float. Due to this, it will be possible to play the bait, available on the hook, so the appetite of the fish will rise, and it can get caught. But you need to make sure that the nozzle does not reach the bottom of the river, otherwise the fish may not notice it.