When laying gypsum plasterboard sheets, in the case of large volumes of work, one can often see how professionals, without turning off the screwdriver, wrap up several dozen self-tapping screws without a break. Looking closely, you can see that they are fed to a rotating bit, tucked into a special plastic clip. Such a tape screwdriver at work is somewhat reminiscent of an equipped machine gun. The feed mechanism in it works on a similar principle.
Appointment
Such a tool can be safely attributed to professional equipment, because when performing ordinary work, it does not suit much and is intended for frequently repeated, similar operations. By value, a tape screwdriver is superior to household models similar in characteristics. And the matter is not only in the special feeding mechanism. The devices are made with a high margin of safety because their purpose is large volumes.
You can work with such an aggregate even one. There is no need to take out a new self-tapping screw every time, push it onto the tip of the bit, hold and adjust for direction accuracy. Thanks to the curb tape, one arm is released. There is an opportunity to reliably hold the sheet until the moment when several screws can quickly fasten it to the guide planes.
Features
The tape screwdriver can be structurally made with a stationary mounted feed mechanism for self-tapping screws. Such an aggregate cannot be used without curb tape. The calculation of the manufacturers of such equipment is understandable - for each type of work there should be a tool.
Another option is a removable nozzle for a conventional screwdriver. Without it, the unit can be used in the manual piece-dressing mode of each self-tapping screw. To some extent, this is beneficial. The device from a professional easily turns into a universal tool by quickly removing the “muzzle” device. If necessary, it can be used for serial work with standard size screws, and also manually install any others (different in length, base thickness, cap diameter), but suitable for slot screws, manually without a nozzle.
Benefits
The volume of the tape is 50 screws. This is the calculated amount for securely mounting a standard drywall sheet in any position. Having equipped a tape with a screwdriver, you can confidently proceed with installation. The tool has good ergonomics: a convenient handle allows you to work for a long time, and you quickly get used to its grip.
The belt mount allows you to quickly free your hands and at the same time, the tool is always at hand. The control buttons are conveniently located. The nose of the feed head tape is narrowed, which allows you to put corner fasteners in the immediate vicinity of the wall.
The cordless cordless screwdriver gives you even more freedom of action. There is no need to control the length of the carrier, worry that you can trip over a network cable. This is especially important when working with scaffolding at high altitudes. However, you will have to pay extra for mobility, because battery models are more expensive.
Modifications
Leading manufacturers of screwdrivers, as a rule, represent a line of professional tools in a separate direction. Makita, Metabo, Dewalt, Bosh are companies whose products can be safely recommended for responsible work. Their tape screwdrivers work with 25 - 55 mm screws. Senco Duraspin DS 275 and Makita BFR 750 RFE are units that are capable of wrapping screws up to 75 mm in length in tape mode.
All models have an adjustment of the immersion of the screw head. There is the possibility of a reverse stroke. And there is no need to manually fill in the wrong screwed screw. Adjusting the engine speed allows you to most accurately adjust to the operating mode. The refueling mechanism is implemented as simple as possible. When working at different angles, the cassette tape does not twist.
Manufacturers are experimenting with the design of the handle shape, trying to balance the tool for professional work. The Bosch GSR 6-45 tape screwdriver with a nozzle has the usual shape for “household” models. The center of gravity of the tool with a staple-shaped D-shaped handle is offset, which makes it possible to perfectly balance the unit and maintain the natural position of the drywall hand during operation.
BOSCH GSR 6 - 45 TE Tape Screwdriver
A highly specialized unit is designed for screwing standard screws into drywall and other surfaces to a given depth. Turns into a tape after installing on the head nozzles with feeder Bosch MA 55 Professional. By the way, it is also suitable for the BOSCH GSR 6 - 45 TE and 6 - 60 TE models.
The model differs in operational durability, reliability, reasonable design, design and ergonomics, characteristic for the entire instrument of the trademark. The 700 Watt motor provides stable operation with standard fasteners on soft and medium density materials. Power is supplied from the network. The weight of the unit is about 1.4 kg.
I am glad that there are clips on the body for carrying on a suspension. A wide button with a lock is convenient for pressing in any position of the hand. Adjustable engine speed from 0 to 4500. It is worth noting that the drilling function is not provided. The inside diameter of a hex under a bat is 1/4 of an inch. But in combination with the nozzle, the unit quickly turns into a tape screwdriver. It is traditionally completed with auxiliary accessories and a carrying case.
Tape nozzle
Other manufacturers went by equipping the standard model of a screwdriver with a removable feed mechanism. So, in addition to Bosch MA 55, there are similar units from Kress (SMV), Metabo (SM 5–55), Hilti (SMD 57). The principle of operation is similar for all models. The tape is pulled by pressing the movable nozzle nozzle to the working surface of the material.
Screwing occurs contact when the engine is constantly running. Like Bosch MA 55 Professional, the models from Kress, Metabo and Hilti are compatible with their class representatives of the same type. The advantage of such models to specialists using the tool for different purposes is obvious. Drywall tape screwdriver can be assembled from a standard basic model by attaching a quick-detachable nozzle, purchased separately.