More recently, fishermen had no idea about the existence of such a device as an underwater camera. Today, many lovers of this type of recreation were able to appreciate the presented device in a pond. Although there are many fishing enthusiasts who are skeptical of such innovations. However, such a device provides a lot of prospects for its owner.
DIY underwater camera for winter fishing allows you to save money on the family budget. It will provide an opportunity to assess the topography of the bottom, find the best place for fishing, choose the best gear. The camera will allow you to see how the fish reacts to the bait. Therefore, every amateur or professional will be interested in how to make such equipment on their own.
Benefits
Do-it-yourself underwater camera for winter fishing is mounted quickly enough. Before starting such work, it is necessary to consider what advantages such equipment provides in a pond. Most often, such devices are needed in the winter. To get information about a specific fishing area, the camera is lowered into the water. It provides information on the presence or absence of fish under ice.
The camera also provides information about the exact condition of the reservoir. During the study, it will be easier to determine the depth, amount of aquatic vegetation. Based on the results obtained, the fisherman will be able to choose the optimal type of fishing, bait.
Among other things, the camera provides the ability to monitor the behavior of fish of various species, their reaction to a particular bait or bait. This allows you to control the fishing process. Also, the equipment will allow you to observe the activity of underwater residents.
Instrument Features
Do-it-yourself underwater video camera for winter fishing is created by analogy with special devices that are currently presented in stores. Such equipment has a number of distinctive features. The camera is fully consistent with conventional types of ground-based devices. However, for shooting underwater, you need to provide a good backlight. Otherwise, in the water column it will be difficult to discern at least something.
The camera body, for obvious reasons, must be waterproof. Therefore, deciding to create such a device from a smartphone, you need to carefully consider this issue. Today on sale equipment of some manufacturers is presented, which has the ability to be under water for a long time. However, in most cases, the smartphone needs to provide full protection against penetration into the water.
The optical device is immersed in water. By cable, information from the camera is transmitted to the monitor. In purchased models, it is possible to rotate the tracking device. However, homemade devices have somewhat limited functionality.
Functionality
Purchased models may have a number of specific features. The cost of such devices depends on this. On sale you can find cameras whose price will be from 6 to 45 thousand rubles.
An underwater video camera for winter fishing (it is quite easy to do it with your own hands) should correspond to the basic qualities of the purchased cameras. First of all, attention should be paid to the immersion depth of the tracking device. For this, the housing must be sufficiently tight. The camera will have to withstand high pressure.
The sensitivity of the optical device will determine the appropriateness of its use in a pond. This figure should be quite high. You will also need to create suitable lighting. It should not be too dim, otherwise the camera will not be able to catch all the details. The high brightness of the flashlight is also unacceptable. The fish will be afraid of such lighting.
In addition, the device should not react negatively to severe frost. Otherwise, it will be impossible to use it in winter fishing conditions.
Is it worth it to create a camera yourself?
A home-made underwater video camera for winter fishing has both advantages and disadvantages over its purchased counterparts. Many fishermen decide to create such a tracking device because of the high cost of the devices on sale.
To make a video camera for underwater surveillance of sufficiently high quality, it is necessary to prepare the corresponding structural elements, as well as have experience in handling electronics.
If the tracking device is of insufficient quality, then video surveillance will be difficult to perform. Therefore, system components must be characterized by certain parameters.
Mobile phones or smartphones are best suited for such purposes. This is due to their compact size and low weight. A USB cable is required to connect the camcorder to an electronic device. For normal operation of the system, it should not be longer than 5 m.
Necessary materials
Do-it-yourself home-made underwater video camera for winter fishing is assembled from certain components. They must be prepared before starting work. First, you should evaluate the quality of all components of the system.
A car battery is suitable for powering the system. For a trip to the pond in your vehicle, this option will be preferable. One of the most important components on which the quality of the system will depend is a sealed container for the smartphone. His choice should be given special attention.
In addition, you need to prepare an extension cord, an inverter. The cell phone camera should have good photosensitivity. To create a weight, a piece of lead is suitable. To make the right backlight in water, you need to purchase ultraviolet diodes.
You also need to buy superglue, sealant, as well as electrical tape. Next, a home-made underwater camera for winter fishing is put together according to certain instructions.
Camera selection
A good underwater camera for winter fishing with your own hands from a smartphone is done quite quickly, but requires a careful approach to choosing an optical device. It should be small and very light. This will allow you to better manage it in the water.
When choosing a camera, you need to pay attention to the quality of shooting. The picture should be clear. Otherwise, to make out at least something in the dark water will be difficult. Also, the camera must withstand increased pressure in the water.
The features of the smartphone screen itself should also be given great attention. It should be large enough so that the fisherman can see all the details of the image. Reliable devices are manufactured by trusted, well-known manufacturers. Therefore, when choosing a smartphone, it is better to give preference to such brands.
Beginning of work
After preparing the required components, an underwater camera for winter fishing is assembled. Making the presented device with your own hands will be easier according to the proven instructions.
First you need to prepare a monitor on which the image will be displayed. It can be a car rear view camera or a DVR. Next, the serviceability of his work is checked (there should be no interference).
Next, you need to configure the camera and put it in a waterproof container. On top of the plastic you need to punch a hole. Through it, a wire will approach the smartphone. It must have an appropriate protection class in order to be able to be used under water.
Device creation
A home-made underwater camera for winter fishing (everyone can do it with their own hands) requires the use of a lead weight. Long pieces of material should be put on the bottom of the container with a smartphone.
To create a backlight, holes are made at the top of the container. Using soldering, the wires are connected to the circuit with the power cable of the smartphone. All places where the packaging was broken must be lubricated with sealant and wrapped with electrical tape.
The system must be powered by a car battery. It must be well charged. The diving cable also needs to be wrapped with electrical tape. Not a single drop of water should get inside the container with the camera.
Using the appliance
An underwater camera for winter fishing (you can do it yourself for an hour with your own hands) during operation must be immersed to the required depth. To do this, the device is lowered into the hole. A fisherman holds her by the cable. The camera should be 8 cm below the hook with the bait.
When immersing the device to the required depth, wait a few minutes. Visibility will appear when particles of silt and sand in the water settle on the bottom. Then you can explore the terrain. The camera then lays on the bottom so that the bait hook is visible.
The hole must be constantly cleaned of ice. When lowering the camera, it must be rotated 360 degrees every 20 cm of immersion. This will give an idea of the situation under water. It will be possible to drill another hole if there is fish in this place. A hook with a bait will drop into it.
Having considered how to create such a device as an underwater camera for winter fishing with your own hands, you can create an excellent device for tracking the inhabitants of a reservoir. Camping with the participation of such a device will be interesting and exciting. With the right approach to the use of such equipment, there are all chances to return home with an enviable catch.