Every housewife is faced with the issue of cleaning the oven. There are several methods for removing fat and soot. Some practice the old ways, using folk remedies for this. Others use modern cleaning products. It is important to understand what it is - the traditional cleaning of the oven, and how it is carried out. There are many cleaning products on the market. It is worthwhile to figure out which ones are best used for high-quality pollution removal.
Features of traditional cleaning
Often people ask what it is - a traditional oven cleaning. Such a system includes time-tested methods. Mistresses use sponges and classic cleaning products. There are folk remedies for removing fat.
Cons of the traditional method
The traditional type of oven cleaning has several disadvantages:
- In order to wash the oven, a person expends a lot of strength and energy. It must be remembered that traditional oven cleaning is a manual process.
- It is necessary to wash the tray separately from the grate.
- When cleaning with a special powder, there is a risk of damaging the surface of the oven.
Advantages of the traditional cleaning method
When housewives ask about the traditional cleaning of the oven, what is it, then experts describe the advantages of this method:
- No need to spend money on expensive funds. Housewives use time-tested methods of cleaning with soda, vinegar, hydrogen peroxide.
- The traditional method is most often used for standard ovens that are not equipped with a self-cleaning system. This method allows you to save electricity, which is consumed in the self-cleaning mode on expensive ovens.
- The tools that are used for the traditional method are always at hand. Soda, ammonia is in every home.
Enamel easy cleaning of the oven, its features
The inner surface of such an oven has a smooth surface, there are no pores on it. Often after cooking, grease and soot remain on the coating. Contamination from such a coating can be removed with a damp cloth. Enamel saves housewives time, no need to wash the oven for hours.
What is meant by catalytic purification?
Many people ask about the catalytic cleaning of the oven. What it is? This process is also called hydrolysis treatment. The method is characterized in that soot and fat dissolve under the influence of water vapor.
To make the oven shine clean, you need to perform several measures:
- A baking sheet with water is placed in the compartment. Some add detergent.
- The oven should be turned on, set the maximum temperature, left in this state for thirty minutes. It is necessary to monitor the amount of water and periodically add it.
- Steam contaminants soften. They are then easily removed with a rag and running water. Lattices can be rubbed with a sponge.
Young housewives often think that the catalytic cleaning of the oven is a process in which you do not need to manually clean the surface of the cabinet. Reasoning of this kind is not entirely true. The method allows you to spend much less time cleaning the unit, but still have to work with a sponge to completely clean the surface.
The catalytic method can be used only if there is a special enamel. It does not allow fat to penetrate the surface. Contamination does not harden, which makes cleaning the cabinet much easier.
The advantages of the catalytic method
With catalytic surface cleaning, little energy is wasted. This saves money on utility bills. Enamel acts on fat, it oxidizes and then breaks down. The cleaning process becomes simpler. The oven is cleaned even when something is baked in it.
Minuses
One of the disadvantages of catalytic cleaning of the oven is the short life of the panels with enamel. The resource of such surfaces involves 3000 hours of operation of the cabinet. Panels do not allow fat to accumulate only on the walls of the device. The rest of the inside should be cleaned by itself.
Which method is better - traditional or catalytic?
The main difference between these methods is that the traditional one allows you to clean the oven with water vapor, while the catalytic one cleans the surface of contaminants using special enamel on the panels. These methods can be used both on gas ovens and on electric ones.
The traditional method (hydrolysis) makes it possible to save on the purchase of cleaning products. The catalytic method saves the power of the hostess. Fat dissolves with special enamel. No need to spend extra time on cleaning. The walls of the unit are cleaned during cooking. During the traditional method, it will not be possible to cook in parallel, since you need to put a container of water in the compartment. During the cleaning procedure, high temperatures are used that are not compatible with the preparation of most dishes. The hostess will have to wait until the unit cools down.
Catalytic surfaces often have to be changed. From an economic point of view, the desired method is more costly. It must be remembered that traditional oven cleaning is a method that takes time and effort.
Each hostess herself decides which method is more suitable for her. Both methods have their pros and cons, and you cannot say for sure which one is better.
Cleaning Product Overview
It is difficult for a modern housewife to choose the right tool for cleaning the oven. The stores offer a wide range of different gels and sprays to remove grease and soot. Most popular remedies:
- Breff mousse for cleaning the oven. The tool copes well even with old fat in the oven. Thanks to the thick foam, the mousse dissolves contamination. The product must be removed with a damp sponge, and then wipe the surface with a wet cloth.
- Amway for cleaning the oven is in great demand. This tool is convenient to use, has a pleasant smell - say the reviews. It quickly removes fat and effectively cleans the oven. With it, you can even cope with difficult to remove traces of cooking.
When working, remember safety precautions. Cleansing procedures should be carried out with gloves. During operation, it is necessary to ventilate the room. The product must be washed off well with running water.
It is best to apply mousse or gel for cleaning, and then leave it in the oven for two hours. After this, wash the surfaces well with water.
Folk methods
Many use the "grandmother's method", which consists in cleaning the oven with soda and vinegar. To do this, pour table vinegar into a small container. Using a sponge, they need to wipe the walls of the oven and leave for 5-7 minutes. Wash off vinegar with soapy water. If severe contamination is present, then one third of the pack of soda should be added. The resulting composition must be thoroughly mixed and applied to the walls. After ten minus, you need to wash it off the surfaces with running water. The oven will impress the hostess with its purity and brilliance.
Many add soda soap to soda and vinegar. Such a composition well cleans the glass on the oven door, as well as the handle.
The old method of cleaning with ammonia does not lose its relevance. To do this, put a bowl of water in the oven. A small amount of ammonia is added to it. Usually a few drops are enough. The door needs to be tightly closed, and leave the container overnight in a cupboard.
In the morning, wipe the walls with a damp cloth. There will be no trace of old pollution. The only minus of the method is the astringent smell of ammonia. Not everyone wants to smell this for a long time. If a person is going to use this method, then children should not be allowed into the room. The apartment needs to be ventilated.
Can be used to clean soda and hydrogen peroxide. The composition is odorless, easy to apply and rinse off.
Conclusion
So, we examined what a traditional and catalytic purification method is. As you can see, there are several ways to restore the oven to its former appearance. And sometimes for this you do not need to spend a lot of money - just use the "grandmother" method.