The sound that furniture makes when loaded can annoy and irritate its owners. The problem that many face is when the sofa creaks. How to fix this and what to do in a similar situation? Both old and new products can make a creak. First you need to determine the reasons for the "musicality" of the subject, and then proceed with the fight against this phenomenon.
A wooden sofa creaks: possible reasons
What matters is what material the structure is made of. Suppose a wooden sofa creaks. The most likely causes are as follows.
- Cracking, drying of certain parts.
- Deformation of the spring block. It is possible that one of the springs has broken.
Wood is a material that tends to lose elasticity over time. There are moisture resistant breeds, for example, aspen. There are those who react negatively to wet processing. All wooden parts or one panel can dry out. Direct sunlight also poses a threat.
Brand new sofa creaks? The source of the problem can be too tight mounts. In the case of old furniture, they could be loose. Thinning of batting laid for softness (or other cushioning material) cannot be ruled out.
Why make metal sound
If the furniture has a metal structure, then one of the connection sections can creak. There are many possible options - loose or rusted bolts, ordinary subsidence, breakage of the spring block or one of its ring links.
A folding sofa creaks? First of all, check the lubrication level. Furniture can produce an annoying sound when standing on an uneven surface. Also, the cause may be deformation of the supporting structure. Corners or lateral parts of the product could bend due to constant loads.
Necessary materials
What materials may be required to repair sofas? You need to stock up on the following things:
- soft cushioning base;
- upholstery material;
- spring block, suitable in size;
- plywood board;
- metal corners;
- staples;
- PVA glue;
- bolts and other types of suitable fasteners.
During repair work it is allowed to use materials that are not in the list. Each model needs an individual approach. It is possible that in order to eliminate the “musicality” of an item, it is necessary to completely replace the upholstery. If you plan to replace the spring unit, you must select it in advance in size.
Instruments
What tools may be needed when repairing sofas? Be sure to have at hand the following products:
- construction stapler;
- set of screwdrivers;
- pliers.
Where to begin
Where to start repair work? First of all, the sofa must be disassembled. A study of the internal state of the furniture will help establish the location of the creak being published.
You need to unscrew the fasteners, and then examine them. It is important to pay attention to whether they are tightly twisted and fitted, whether there is a worn thread, rust. If violations of integrity are found, it is necessary to replace the failed fasteners with new ones. Be sure to replace the unit that has undergone corrosion. Rust has already made the metal brittle, disrupted its structure.
You can always limit yourself to replacing one or two springs that have failed. However, failure of one is likely to cause problems with the second. This is because the springs have the same manufacturing method and lifetime. Complete replacement of the spring unit in most cases saves time.
The "musicality" of the sofa has not disappeared? This means that the reason lies in something else.
Common problems and the fight against them
So, the sofa creaks at the person. How to fix this if the problem is the deformation of the spring unit? If it is not rusted or broken, then replacement is not required. To fix the problem, you will need pliers. Gently tighten the rings and tighten the fasteners on the side panels.
Is subsidence the reason the sofa creaks? How to fix this, get rid of annoying sound? In this case, the furniture needs to be updated inside. If the cushioning material (foam rubber, batting, etc.) is thinned, you need to replace it. The lack of friction will cause the sound to stop playing under load.
It must be remembered that the layer should be thick enough. This is required in order to completely eliminate the contact of iron parts. To achieve greater stability will allow the plywood layer. It must be placed under the spring block. First you need to create a top pad of batting or foam. Then gently pull upholstery. It is fixed with brackets using a stapler.
Cracked or cracked tree
What other options can be suggested? A cracked or cracked tree is another possible reason the sofa creaks. What to do in this situation? Replacement of a failed part is required. It can be armrests, a back, a side board, a panel.
Theoretically, the problem can be eliminated by lower costs - with the help of a stable adhesive composition. However, in this case there is no guarantee that the cracks will not propagate further. A wooden product must be carefully inspected for grooves, cracks formed as a result of drying. In particularly difficult cases, it is easier to buy a new product than to update worn-out material.
Other options
Other reasons why the sofa creaks should not be ruled out. How to fix the problem when it comes to folding design? First you need to study the state of the transformation mechanism, which could fail. There are two ways to fix the problem - by completely replacing the elements or fixing them.
Uneven supports are another likely explanation for the “musicality” of the piece of furniture. To fix the problem, they must be adjusted in height. To do this, you need to stock up on plastic corks or other fairly stable improvised material.
Friction of metal parts can also cause the sofa to creak. If we are talking about the iron structure, lubrication of the elements will help to rectify the situation. To do this, use engine oil. It must be carefully instilled at the joints of the mounts. It is important that the oil does not affect the upholstery of the furniture, its wooden parts. It is only necessary to start adding grease after preliminary preparation. The surface should be thoroughly cleaned of grease stains, furniture.
Repairing sofas is a task that everyone can handle. Do not rush to go to the store for new furniture if the old product makes an annoying sound.