Autostart on "Starline" can be installed immediately on a new car in a car dealership. This is a reliable new generation system. Consider the full range of products presented, characterize the Starline line.
Starline A93
In terms of price - quality, the A93 system leads, which quickly gained popularity among domestic consumers. It is equipped with a siren, which can be found in the instructions.
This is an alarm system with feedback and autostart, having 5 full-fledged modes that are conveniently configured using a key fob.
The main device for use is a key ring on a little finger battery, which is enough for 1 year of operation. There are buttons "open - close", "move".
The alarm unit looks almost the same in all models. There is an antenna with a built-in tilt sensor. The kit includes a spare remote control without feedback, which allows you to control the alarm. There is an emergency shutdown security function. A full warranty on the installation and operation of such a startup on Starline is up to 3 years.
Starline A94
This autostart on "Starline" differs from the previous model with a key fob. The functionality of this system has improved the range of protection against interference.
Matching module
How to enable autostart on the alarm "Starline A91"? The model is more expensive in cost. To connect any alarm, you must use the matching module. What it is?
All modern cars have digital wiring arranged using analog systems. To coordinate it with the vehicle, a fee is used. In new car models, it is already installed, and in earlier models it is necessary to install it yourself.
For ordinary use, knowledge of its purpose is not necessary.
Starline A95
This is the most reliable startup on Starline, which is a pleasure to use. The warranty period is up to 3 years for the system and installation. You will be fully protected by a reliable system that is not scanned, the machine will not be hacked or opened. Good performance range and launch mode.
The system is equipped with a new stylish trinket, has a built-in can-module, energy saving.
Mobilizer module
To install an alarm on a modern car, it is necessary to install a bypass module and a mobilizer, which has the form of an antenna with a box. It installs either a chip-clone of a key, or a second key. It is not active, but is activated only at the time of autorun.
The antenna transmits a signal to the standard mobilizer and helps the car start up. Since everyone has Android-based mobile phones, it is convenient to control alarms using a GSM system. This is a car alarm control from a phone application. It is completely free to download via the Internet and allows you to provide alarm management.
The GSM-board can be inserted into the alarm unit along with a SIM card, which will provide complete control of the system from the phone and receive messages.
This will increase the alarm range. The application will be displayed on the desktop of the mobile phone. Agree, very fast and convenient. No need to wear extra devices.
From the phone, you can configure all start modes , set a timer to select the time for which the engine warms up, set the start at a certain engine temperature.
Such a module is purchased separately. It will help protect the car from intellectual hacking.
Function enhancement
Starline has additional A95 security features that are equipped with a wireless lock relay, a buzzer and tags. This is a complete security device that blocks one of the circuits of the car. Without a mark in the cabin, the car will not leave anywhere.
Depending on the car model, different labels can be set. You can wear them in documents. If you forget the label at home, the car will begin to warn about this with a sound signal. The system will always search for the label.
There are several modes of using such a device:
- When a tag search is always carried out.
- For a one-time tag search when disarming for the first time. No more tag searches will be performed.
- Service mode, when even during the repair process in the service center it will not be noticeable that a mobilizer is installed.
In addition to the mobilizer, you can install the hood lock from Starline. Such an electromechanical device works in parallel with the mobilizer, preventing the lock from being unlocked without the permission of the owner.
A full security complex consists of:
- security system;
- mobilizer;
- hood lock.
You can also use search beacons M15 and M17 from Starline. The M15 is an autonomous beacon, a search device to help locate a missing vehicle. It is used to monitor to track the speed and direction of the car on the map.
Configure autorun - how the keyfob buttons work
Many motorists do not understand how to enable autorun on Starline. We consider in detail the sequence of such actions. To begin with, it is important to figure out how to correctly determine the duration at the touch of a button, implementing the startup procedure on the "Starline E91".
By briefly pressing the button, the action lasts up to 0.5 s. If you press for a long time, you need to hold the button until a beep sounds. Double tap is an action 2 times.
By successive pressing - when the first time press for a long time, and when the second press - briefly.
If you press the right button once, it is responsible for whether the armed mode is activated. It has a sound confirmation. If you want to do without sound, press long, then briefly.
The second button works like the first. If you press the button 2 times, an additional shock sensor starts to fire.
The third button, when pressed 1 time, will tell about the status of the alarm and the temperature in the cabin. By pressing 2 times, the engine temperature will be known. You can activate an additional channel, if you press for a long time, programmable operating modes will be activated.
After a short press, the cursor moves to the desired icon.
Autostart features
The list of programmable functions:
- A mode that allows you to autostart from the alarm clock.
- By timer - a type of periodic start-up with an interval of 2 to 24 hours, depending on the need for selection.
- By temperature - if the engine begins to exceed the set threshold in temperature indicators. Then it will warm up in automatic mode.
- Anti-theft mode.
- Turbo - to maintain engine performance for a period of time after the ignition is turned off. Suitable for the car in which the turbine is installed.
- Auto - automatic security activation 10 seconds after all doors are closed.
- Mobilizer mode - blocking after turning off the ignition.
Key Fob Button Sequence
With a long press on the unit and short on the deuce, the silent protection mode starts.
Pressing buttons 1-3 will enable autorun. If you press 3 again, you can extend the time.
How to enable autorun on Starline? By simultaneously pressing buttons 1 and 2, the “Anti-robbery” mode is activated
If you simultaneously press buttons 1 and 3, the key fob itself is blocked, and after pressing buttons 2 and 3 this function is disabled. After a long press on button 3, you can set the time on the alarm, activate or deactivate the timer.
We program key rings
How to configure autostart on the Starline alarm? A new keychain must be programmed. On one car, you can get no more than 4 trinkets. Locate the protrusion of the service button in the passenger compartment and press it seven times when the ignition is off.
After turning it on, a seven-time signal will sound. Using the remote control, press buttons 2 and 3 while holding them, and this device will be programmed. If it is lost and you need to turn on the security mode when the ignition is on and the door is open, press the service button protrusion 3 times, turning off the ignition. Alarm will beep.
After you close the door, the system will lock after 20 seconds. This is a very useful feature in the event of a keyring loss. Knowing how to enable autorun on Starline A91, you can program several key fobs.
How to program security and service functions
There are standard tables - instructions on how to set autorun to Starline. For example, function 9 allows you to turn off the alarm without a key fob. This is an algorithm that allows you to learn how to disable autorun on Starline in an emergency way without a personal code, with a one-digit, two-digit and four-digit code. When choosing options with a set of personal code on the key fob, the inscription "Pin-code" is displayed.
To enter the programming menu 1, you will need to press the service button for 5 times, then the ignition will turn on. Wait for a five-time signal. Press 9 times. This will be a hint on how to enable autostart so that the Starline A91 alarm starts working. After 10 seconds, you will need to press button 3. This will read the result on the display. A two-digit pin code is now activated.
You can discard all factory settings by pressing the button responsible for the service nine times, turning on the ignition, and waiting for 9 siren signals. After pressing button 1, all factory settings will be reset.
Summary
When the cold weather comes, many drivers are interested in turning on a system such as remote engine startup or starting in accordance with temperature indicators.
Starline alarms can cope with this function provided that such a system is correctly installed and configured.
For many motorists, information is not available regarding the inclusion and configuration of the autostart of their vehicle. There are several reasons for this - a new or rented car.
After reading the article, you can easily ensure that the engine starts automatically using the Starline alarm.
One of the most popular driver’s mistakes is ignoring the implementation of the mandatory recommendations that will be required to enable autostart and close the door of a muffled car manually using a key fob. Now car enthusiasts will be able to take advantage of the knowledge about the startup order of Starline A91. The question of how to make autostart on Starline will not be a mystery to them.